A Guide to Cell Phone Signal Boosters

Poor cell phone reception continues to be a major problem…

Debt Busters: The Complete Guide to Getting out of Debt

When it comes to getting out from under the mountain…

A Guide to Briggs and Stratton Carburetor Repair

A Guide to Briggs and Stratton Carburetor Repair

The Briggs and Stratton carburetor is used in the many and varied engines built by the company. Most of these are small engines such as those for snow blowers, lawn mowers and marine engines. The Briggs and Stratton carburetor is relatively easy to troubleshoot and repair if necessary, with a little know-how and the right tools.

Keeping your Briggs and Stratton carburetor clean and properly adjusted will ensure the engine runs smoothly and you won’t have to face major repairs. This is the best way to prevent problems with your engine. Cleaning and adjusting your Briggs and Stratton carburetor requires only a can of spray carburetor cleaner and a few tools you are likely to have already at hand. Clean your Briggs and Stratton carburetor regularly to ensure top performance.

Debris in the carburetor often causes problems with the engine. Keep it clear by regularly inspecting it and spraying it with carburetor cleaner. A number of problems can be caused by a clogged carburetor, so checking for debris first can prevent a lot of wasted time on troubleshooting another potential problem.

If debris is not the issue, there could be other issues with your Briggs and Stratton carburetor that need to be addressed. If you notice that the spark plugs are dry when looking inside the engine, leaking mounting gaskets on the other end of the carburetor may be to blame. Other possible problems that could cause this include a stuck carburetor inlet needle. These can cause fuel supply issues, along with other possibilities, so repairing the problem may solve all your engine troubles.

If you are having problems starting the engine, the choke may be the problem. This is often caused by debris and solved again with carburetor cleaner. Check to see that the choke plate on the carburetor is opening and closing easily. If not, spraying it with the cleaner will help it to work properly again.

Almost all of the minor issues found in the Briggs and Stratton carburetor can be fixed relatively easily with the use of some carburetor cleaner and a few tools. In most cases, you should be able to repair the problem without even removing the carburetor from the engine itself. This makes for a lot less work and less clean up afterwards.

If you have cleaned the Briggs and Stratton carburetor and are still having problems, you might need to take it to a licensed repair person who can give it a more in-depth look, especially if you are not mechanically inclined. The problem might not even be with the carburetor, but if you feel certain it is, sometimes having a trained eye take a look at it will help uncover an issue you may have missed.

Briggs and Stratton carburetor repair and maintenance are easy for most lay people to take on, and carburetor cleaner is readily available at auto parts stores. Be sure to use protective eye wear when using the cleaner to prevent the spray from causing eye damage, as well as taking all other needed precautions.

Follow Zenedy